Skip to content

ORACLE Lighting Jeep Wrangler JL/Gladiator JT 7" High Powered LED Headlights (Pair)

Original price $540.95 - Original price $740.00
Original price
$540.95
$540.95 - $740.00
Current price $540.95
  • Product Description
  • Features
  • What's Included
  • Installation
  • Part Numbers
  • NOW AVAILABLE! Complete Package for adding High-Performance 7" LED Headlights to your Wrangler JL or Gladiator JT without any fabrication or cutting your factory wiring. This complete Plug-&-Play kit also features Vertical and Horizontal headlight adjustment so you can put the light on the road (where you need it) and not blind oncoming traffic.

    The Ultimate 7" LED replacement headlight option for the Wrangler JL/ Gladiator JT. This rugged solid-state LED design is perfect for the Jeep owner looking for high-quality lighting for better night time visibility without overpaying. Installation is very easy with the included Wrangler JL/ Gladiator JT specific “Plug and Play” connectors. You can even choose optional colored Halos for even more customization!

    HALO WIRING:
    White or Amber Halo **Additional wire may be needed**
    Note: DRL wire cannot be used as a power source - Tapping into Park Lights will give manual control over LED accessory during daytime driving - LED accessory will turn on automatically in night mode when switch is set to AUTO - For full automatic control over the LED accessory use fuse F52 in the engine compartment fuse panel.

    HALO WIRING:
    Red, Blue, or Green Halo
    Extend Red (+) wire to controller, to toggle switch, existing headlight halo
    Extend Black (-) wire to common ground

  • Product Features: (Per Light)
    • Low Beam Wattage: 30W Normal/36W Max
    • Low Beam Lumens: 2200 Lumens/3600 Raw Lumens
    • High Beam Wattage: 40W Normal/48W Max
    • High Beam Lumens: 3600 Lumens/4800 Raw Lumens
    • Color Temperature: 6000K (Cool White Color)
    • Input Voltage of Light: 12-24V DC
    • Input Voltage of Halo (If Included): 12V DC
    • Current Draw: 2.50 Amps @ 12V DC / 1.30 Amps @ 24V DC
    • Optional: ORACLE Halo Rings Pre-Installed
    • Premium Performance Phillips Luxeon ZES LEDs
    • Die-Cast Housing with Corrosion Resistant Coating
    • Heavy Duty Solid State Electronics
    • Hard-coated Polycarbonate Lens
    • Wide Beam Pattern with Sharp Cut-Off Line
    • Easy Plug & Play Installation
    2 Year Warranty
    • DOT and SAE Certified

    Latest Product Improvement

    • Improvements in brightness and reliability by adding a constant current LED driver to the main circuit board inside of the lamp to control the LED halos.
    • Increased Reliability- By conditioning the power going into the LEDs this prevents degradation which can shorten the overall lifespan of the product.
    • Wider Input Voltage Range- The new SMD Halos can operate on a very wide voltage range from 12V-24V so that voltage spike can not damage the LEDs.
    • Brighter/ More Even Light- by moving the heat load of the resistors off the PCB we are able to increase the number of LEDs on the circuit board without thermal issues.
    • LED chips upgraded from a Cree LED to a Phillips Luxeon ZES chip.They deliver a very high efficacy 130LM/W ratio while having lower thermal output.



  • Package Includes:
    - 2 x ORACLE 7" High Performance LED Headlights (Pair)
    - 2 x Wrangler JL/Gladiator JT-specific "Plug & Play" Wiring Adapters
    - 2 x Direct-Fit Beam Adjustable Headlight Brackets

    With ColorSHIFT Upgrade:
    - 2 x ORACLE 7" High Powered LED Headlights (Pair) - Black Bezel with ORACLE ColorSHIFT Halos Pre-installed inside the Headlights
    - 1 x ORACLE ColorSHIFT Controller Module
    - 1 x ORACLE ColorSHIFT Wireless Remote
    - 2 x "Plug & Play" Wiring Adapters
    - 2 x 7" Adjustable Headlight Brackets




  • Download Wiring Guide

    View FMVSS 108 Test Data

  • HALO KIT TYPE ORACLE PART# COLOR/OPTION
    NO Halo Kit 5769J-504 No Halo
    LED Halo Kit 5769J-001 White
    LED Halo Kit 5769J-003 Red
    LED Halo Kit 5769J-004 Green
    LED Halo Kit 5769J-005 Amber
    ColorSHIFT Halo Kit 5769J-334 ColorSHIFT - w/No Controller
    ColorSHIFT Halo Kit 5769J-330 ColorSHIFT - w/RF Controller
    ColorSHIFT Halo Kit 5769J-333 ColorSHIFT - w/2.0 Controller
    ColorSHIFT Halo Kit 5769J-335 ColorSHIFT - w/BC1 Controller

Customer Reviews

Based on 2 reviews
100%
(2)
0%
(0)
0%
(0)
0%
(0)
0%
(0)
A
Abraham Vindel
Great product

I bought the one with theblue halo, they look amazing. And they were easy to install, it's a DIY project. Just unplug, plug and tight everything. I actually conected the halos to a switch so I can turn them on/off whenever I want to.

Yo compre las azules, y se ven excelentes. Son bien fáciles de instalar, es algo que puedes hacer tu mismo. Solo tiene que desconectar las viejas, conectar las nuevas y atornillar todo. Yo conecte el aro a in switch para así poderlas encender y apagar cuando quiera.

Thank you so much for the review and for featuring it in Spanish!

P
Phil Gonzales
Awesome.

I got the color shift version of these lights and they are absolutely amazing and, they are super bright in on a Jeep Wrangler the installation is very easy. My friend is an electrician any help me install the Halo lights so That I can turn them on by themselves or with their headlights, the one thing to be careful of is that if you install them with how the instructions say then you will be plugging them onto the battery and that can drain your battery, but my friend was able to run the wiring through the headlights in the fog lights to prevent excessive battery usage. Over all amazing light's very bright and vivid.

Compare products

{"one"=>"Select 2 or 3 items to compare", "other"=>"{{ count }} of 3 items selected"}

Select first item to compare

Select second item to compare

Select third item to compare

Compare