ORACLE Adhesion Promoter Applicator Pads
Original price
$3.75
-
Original price
$3.75
Original price
$3.75
$3.75
-
$3.75
Current price
$3.75
A convenient single-use applicator pad pre-loaded with liquid adhesion promoter — bonds VHB foam tape to Acrylic, ABS, PC, and Glass automotive surfaces. Dries in 30 seconds. Sold as singles.
✓ Increases Tape Bond Strength
✓ 30-Second Dry Time
✓ Covers ~1 Sq/Ft Per Pad
✓ VHB Foam Tape Compatible
✓ Easy Single-Use Packet
ORACLE Part #: 2082-504  — Sold as Singles
Product Overview â–¼
The ORACLE Adhesion Promoter Applicator Pad is a convenient, single-use liquid primer designed to maximize the bonding effectiveness of double-stick and VHB foam tapes on common automotive surfaces. Whether you're mounting lighting components, trim pieces, or accessories, this primer ensures a secure, long-lasting bond on Acrylic, ABS, Polycarbonate, and Glass substrates.
Each packet features a built-in applicator pad for clean, mess-free application. Simply wipe the promoter onto the bonding surface, allow 30–90 seconds to dry, and apply your tape immediately for best results. One packet covers approximately 1 square foot — ideal for most single-component installations.
Storage: Store in a cool area out of direct sunlight.
Key Features â–¼
- Increases bonding effectiveness of double-stick and VHB foam tapes
- Convenient packet applicator — easy to use, no mess
- Fast dry time — dries in approximately 30 seconds
- Coverage — one packet covers approximately 1 sq/ft
- Compatible surfaces: Acrylic, ABS, Polycarbonate (PC), and Glass
- Designed for use with VHB foam tapes
Performance & Technical Specifications â–¼
TypeLiquid Adhesion Promoter / Tape Primer
ApplicatorSingle-Use Packet with Built-In Pad
Dry Time~30–90 Seconds
Coverage~1 Sq/Ft Per Packet
Compatible SurfacesAcrylic, ABS, PC, Glass
Compatible TapesVHB Foam Tapes (wide variety)
Min. Application Temp55°F (13°C)
Sold AsSingles
What's Included â–¼
- (1) Adhesion Promoter Applicator Pad
Application Tips â–¼
- The bonding surface should be clean and dry before application.
- Contaminated surfaces should be cleaned with an untreated, lint-free cloth. To remove wax, grease, or dirt, use isopropyl alcohol or a paint prep solvent.
- Do not use in environmental conditions lower than 55°F.
- Apply a thin, uniform coating to the bonding surface using the minimum amount that will fully coat the area.
- Apply promoter only to areas that will be fully covered with tape.
- Allow 30–90 seconds to dry (drying time may vary due to temperature and/or humidity).
- The primer must be fully dry before applying tape.
- For best results, apply tape immediately after primer application or no more than one hour after.
- Ensure the primed surface remains free from contaminants prior to tape application.
Note: If the primer comes into contact with a painted surface, clean the area immediately with soap and water. Do not allow the liquid to sit on the painted finish.
Part Numbers & Options â–¼
2082-504Adhesion Promoter Applicator Pad — Single
