ORACLE Lighting developed this flush mount LED tail light design for the Ford Bronco to deliver a lower-profile alternative to bulky factory tail lights. By protruding significantly less than stock, the design helps reduce exposure to trail obstacles while giving the Bronco a bold, modern appearance.

These tail lights feature attractive wraparound styling with functional LED lighting elements, including high-powered reverse lights and signature perimeter lighting for enhanced rear visibility and standout styling.

No more problems backing up at night—these reverse lights act like a pair of integrated LED light bars, delivering up to 1,400 lumens of rear-facing illumination.

• Flush-mount, low-profile design protrudes significantly less than factory tail lights to help reduce trail damage risk
• High-powered LED reverse lights provide up to 1,400 lm of rear-facing illumination
• Signature perimeter lighting delivers a unique, modern look with improved visibility from rear angles
• Wraparound styling complements Bronco body lines and improves visibility from multiple angles
• Plug-and-play installation for a clean and straightforward upgrade
• Available in Standard Red and Tinted lens options

Add an amber turn signal feature using the Dual Function Amber/White Reverse LED Modules (PN: 5915-FB-023).

The reverse light keeps the same brightness, while the module adds an amber turn signal to replace the flashing red section. Installation is a simple module swap using existing hardware; the wiring connects to the existing connector and adds a pin to the original plug.

• (2) Bronco Flush Mount LED Tail Lights
• Installation Hardware
• Online Installation Instruction

The Factory Bronco Tail Lights Were Designed for the Showroom — Not the Trail

The Ford Bronco was engineered to be one of the most capable off-road vehicles in a generation. But the factory tail lights? They protrude several inches past the body panel — putting them directly in the path of trees, boulders, and tight trail obstacles every time you go out.

Damaging factory tail lights on trails is not an uncommon issue for owners who often off-road their Broncos. The factory design creates unnecessary exposure to trees, boulders, and obstacles on tight trails. The frame of the ORACLE Lighting Flush Mount LED Tail Light wraps tightly to the body panel, reducing exposure and vulnerability.

Available in Standard Red (Part #5892-504) and Tinted/Blacked-Out (Part #5892-504-T) for all 2021–2025 Ford Bronco 2-door and 4-door models equipped with factory halogen or LED tail lights.

Built Flush, Built Tough — A Design That Actually Matches the Bronco's Mission

Low-Profile Flush Fit Protects Where It Counts

The ORACLE flush mount design wraps tightly around the truck. Because of the nearly flush wrap-around design, the lighting is visible from any rear angle — a unique solution for the Bronco that the factory tail lights simply cannot match. The difference is immediately visible: where factory lights stick out and catch obstacles, the ORACLE flush lights hug the body and stay out of harm's way — on tight forest trails, rock gardens, and everything in between.

Visible From Every Rear Angle

Because of the nearly flush wrap-around design, the lighting can be visible from any rear angle — a meaningful safety advantage over factory tail lights that are primarily designed to project light rearward. Whether a vehicle is approaching from behind, the side, or an angle on the trail, your brakes, running lights, and turn signals remain clearly visible.

Signature Perimeter Lighting

These Bronco tail lights feature a sleek, modern design with signature perimeter lighting that traces the outer edge of the housing for a distinctive, high-end appearance. It's the kind of design detail that makes these lights look like the could have been a factory option — not an aftermarket add-on. The clean, modern profile complements the Bronco's aggressive body lines without visually competing with them.

1,400 Lumen Reverse Lights — Like Having LED Light Bars in Your Tail Lights

These LED reverse lights are essentially a pair of LED light bars mounted into the tail light housing, providing 1,400 lumens of high-output rear-facing illumination. Backing up in a dark campsite, a tight trail turnaround, or an unlit parking lot becomes a completely different experience. The immediate, full-brightness output of the LED array eliminates the dim, yellowish reverse light glow that halogen-equipped Broncos have lived with from the factory.

Plug-and-Play Installation — With a Few Important Notes by Trim

Halogen-Equipped Broncos — Straightforward Install

These flush tail lights are designed for 2021+ Ford Bronco models with factory halogen tail lights, and installation is a true plug-and-play experience. The ORACLE harness connects directly to the factory wiring with no cutting or splicing — most owners complete the full install in well under an hour. Owners have noted it's one of the cleaner, more satisfying installs in the Bronco aftermarket space.

LED-Equipped Broncos — ForScan Flash Required

For LED-equipped Broncos, a ForScan flash is required to configure the vehicle's body control module for the new lights. ForScan is a free Windows application that works with a low-cost ELM327 OBD-II adapter — a one-time process that takes roughly 15–20 minutes. Detailed ForScan configuration notes are available from ORACLE and in the Bronco community forum network. Note: owners running a Ford Performance tune may need to temporarily roll back to a stock tune before connecting ForScan, then re-apply the performance tune afterward.

Important Compatibility — What This Fits and What It Doesn't

These lights fit 2021+ Ford Broncos with factory halogen tail lights and those with LEDs (requiring ForScan Flash). They do not fit the Bronco Sport or Bronco Raptor. These housings have been designed and tested on US-spec vehicles only. EU and export-spec Broncos require additional consideration for turn signal compliance.

Want Amber Turn Signals? There's a Module for That.

The ORACLE Lighting Dual Function Amber/White Reverse LED Modules for Ford Bronco Flush Tail Lights allow you to add an amber turn signal to your ORACLE tail lights. The reverse light still functions as before with the same brightness, but now also includes an amber feature for a bright turn signal in place of the red taillight section flashing. Installation involves removing the original modules and installing the new modules with the existing hardware — wiring connects to the existing connector with a pin added to the original plug.

This is the ideal upgrade for Bronco owners who prefer the cleaner look of an amber turn signal, or for those operating in states or countries with amber turn signal requirements.

Standard vs. Tinted — Two Looks, One Standard of Performance

Standard Red (Part #5892-504): The bold, high-visibility option. Bright red brake and running sections with a clear reverse lens, delivering maximum output and a sharp modern profile that immediately reads as a premium upgrade over factory lights. The go-to for daily drivers and trail rigs alike.

Tinted / Blacked-Out (Part #5892-504-T): The tinted version allows you to customize the appearance of your Bronco with a smoked lens for a unique, stealthy appearance that pairs seamlessly with black trim packages, Badlands builds, Wildtrak setups, and blacked-out wheel and exterior packages. Full LED output when illuminated — clean, subdued housing appearance when not.

Both versions deliver identical LED performance. The choice is purely about how your Bronco looks when parked.

What's in the Box

Each purchase includes one pair of ORACLE Flush Mount LED Tail Lights for the 2021–2025 Ford Bronco, plug-and-play wiring harnesses, and an installation guide with a linked installation video. The Dual Function Amber/White Reverse LED Modules are available separately for owners who want amber turn signal functionality. ORACLE backs these lights with a 1-year manufacturer's warranty.

Fitment:

• 2021–2025 Ford Bronco (2-door and 4-door) with factory halogen tail lights — direct plug-and-play
• 2021–2025 Ford Bronco with factory LED tail lights — requires ForScan flash
• Does not fit Bronco Sport or Bronco Raptor

FAQs: 2021-2025 Ford Bronco Flush Mount Tail Lights

Q: What years and Bronco models do these flush tail lights fit?

These lights fit 2021+ Ford Bronco models (both 2-door and 4-door) with factory halogen tail lights and those with LEDs. They do not fit the Bronco Sport or the Bronco Raptor. These housings have been designed and tested on US-spec vehicles only — compatibility with EU or export-spec Broncos requires additional research before purchasing.

Q: My Bronco has factory LED tail lights. Do I need ForScan to install these?

Yes. LED-equipped Broncos require a ForScan flash to configure the vehicle's body control module for the ORACLE tail lights. ForScan is a free Windows-based application that works with an inexpensive ELM327 OBD-II adapter — the process takes about 15–20 minutes. If you're running a Ford Performance tune, you may need to temporarily roll it back to a stock tune before running ForScan, then reapply your performance tune afterward.

Q: How bright are the reverse lights compared to factory?

Significantly brighter. These LED reverse lights are effectively a pair of LED light bars built into the tail light housing, delivering 1,400 lumens of rear-facing illumination. This is a dramatic upgrade over the factory halogen reverse light, and even an improvement over factory LED reverse setups — giving you a much wider and brighter view when backing up in low-light conditions.

Q: Can I add amber turn signals to the ORACLE Bronco flush tail lights?

Yes — with an optional add-on module. The ORACLE Dual Function Amber/White Reverse LED Modules add an amber turn signal feature to the flush tail lights, replacing the red taillight section flashing with a bright amber signal. Installation is a simple module swap using existing hardware — wiring connects to the existing connector with a pin added to the original plug. The reverse light output remains unchanged.

Q: How difficult is the installation — do I need a mechanic or special tools?

For halogen-equipped Broncos, this is a clean plug-and-play install most owners complete in under an hour with basic hand tools — no cutting, splicing, or custom wiring required. For LED-equipped Broncos, the physical install is identical, but a ForScan flash adds roughly 15–20 minutes to the process. ORACLE provides a detailed installation video and written guide, and the Bronco community has extensive ForScan documentation available online. No professional installation is required for either configuration.

Q: What's the difference between the standard (red) and tinted versions?

Both versions are functionally and electrically identical — the same 1,400-lumen reverse output, the same signature perimeter lighting, and the same plug-and-play installation. The only difference is the lens: the standard version features a red and clear lens for maximum visibility, while the tinted version uses a smoked lens for a blacked-out aesthetic. The tinted version is especially popular with Badlands and Wildtrak builds running dark exterior packages.

Q: Do these lights come with a warranty?

Yes. ORACLE Lighting backs the Bronco flush tail lights with a 1-year manufacturer's warranty covering defects in materials and workmanship. Given the plug-and-play installation and ORACLE's reputation for build quality in the off-road lighting space, these lights are built to last well beyond the warranty period under normal use.