Skip to content
FREE SHIPPING ON ORDERS $100+ (Continental USA Only, Some Exclusions Apply)
FREE SHIPPING ON ORDERS $100+ (Continental USA Only, Some Exclusions Apply)

Your Cart

Your cart is empty
2015-2023 Dodge Challenger LED Surface Mount Headlight Halo Kit

ORACLE Lighting 2015-2023 Dodge Challenger LED Surface Mount Headlight Halo Kit

$312.00 - $479.99
$312.00
$312.00 - $479.99
$312.00
Color: Red

Transform your 2015–2023 Dodge Challenger’s headlights with ORACLE’s patent-pending surface mount halo system — IP67 waterproof rings that attach directly to the exterior of the headlight lens in minutes, with no baking, no cutting, and no headlight removal required. Available in solid colors or full ColorSHIFT® RGB.
✓ IP67 Waterproof Surface Mount ✓ No Baking or Cutting ✓ Patent-Pending Install System ✓ ColorSHIFT® RGB Available ✓ 5050 Tri-Node LEDs ✓ Minutes to Install ✓ 1-Year Warranty
Part Number Family: 3990-*  |  Fits: 2015–2023 Dodge Challenger (All Trims)  |  Also Available as: Pre-Built Assembly
Product Overview ▼

The ORACLE Surface Mount Halo Kit for the 2015–2023 Dodge Challenger delivers eye-catching, customized headlight styling using our patent-pending surface mount system. Unlike traditional halo kits, these rings attach directly to the exterior of the headlight lens — no removing the headlights, no baking, no cutting. Installation time drops from hours to just minutes.

Encased in a special polymer resin, the halos are completely IP67 waterproof and can function even when submerged. Advanced LED chips produce impressively bright output while consuming less power. The ColorSHIFT® option uses 5050 tri-node LEDs to give you full RGB control — any color imaginable — via your choice of controller.

🔧 Want an even easier install? This kit is also available as a Pre-Built Assembly — simply swap your housing and go.
⚠ Street-Legal Note: White and amber are street-legal colors. All other colors are not intended for on-road use — please verify your state and local driving laws before use.
⚠ Warranty Note: The 1-year warranty covers LED and driver components. Hard part decay due to UV damage, oxidation, or environmental conditions is not covered.
Key Features ▼
  • Patent-Pending Surface Mount System: Attaches directly to the exterior of the headlight lens — no headlight removal, baking, or cutting
  • IP67 Waterproof: Polymer resin enclosure — fully sealed, even when submerged
  • Minutes to Install: Dramatically faster than traditional halo kits
  • Advanced LED Chips: Bright output with lower power consumption
  • ColorSHIFT® Technology: 5050 tri-node LEDs for full RGB color control
  • Multiple Controller Options: Choose from No Controller, Simple, RF, 2.0, or BC2 controller bundles
  • FREE Adhesion Promoter Pad Included: Part #2082-504
Performance & Technical Specifications ▼
Mount TypeSurface Mount (Exterior Lens)
Waterproof RatingIP67
LED Type5050 Tri-Node (ColorSHIFT®) / Single Color
Color OptionsRed, Amber, ColorSHIFT®
Controller OptionsNone, Simple, RF, 2.0, BC2
Headlight Removal RequiredNo
Baking / Cutting RequiredNo
EnclosurePolymer Resin
Warranty1 Year (LED & Driver Components)
Fitment ▼

Fits all 2015–2023 Dodge Challenger models, including:

  • SXT / SXT Plus
  • GT
  • R/T / R/T Plus / R/T Scat Pack
  • SRT 392
  • SRT Hellcat
⚠ Street-Legal Colors: White and amber are street-legal. All other colors are for off-road / show use only — verify your local laws before use on public roads.
What's Included ▼
  • (4) ORACLE Lighting Surface Mount Waterproof Headlight Halo Rings
  • (4) Quick Connect Wiring Adapters
  • (4) Wide Voltage External LED Drivers
  • (1) FREE Adhesion Promoter Pad — Part #2082-504
  • Controller (included with applicable variants)
  • 1-Year Warranty
Installation Guide & Resources ▼

Apply the adhesion promoter pad to the headlight lens surface, then attach the halo rings using the patent-pending surface mount system. Connect the quick-connect wiring adapters to the external LED drivers and route to your power source. No headlight removal, baking, or cutting required.

Want a faster option? The Pre-Built Assembly comes with halos already installed — just swap the housing.
Product Videos ▼

Part Numbers & Options ▼
ORACLE PART# COLOR / OPTION
3990-003 Red
3990-005 Amber
3990-334 ColorSHIFT® — No Controller
3990-504 ColorSHIFT® — w/ Simple Controller
3990-330 ColorSHIFT® — w/ RF Controller
3990-333 ColorSHIFT® — w/ 2.0 Controller
3990-335 ColorSHIFT® — w/ BC2 Controller
Need a controller? Browse all ORACLE controllers and switches.
Warranty, Shipping & Returns ▼
Warranty Info Shipping Policy Returns Policy

Let customers speak for us

from 532 reviews
Awesome modern look

These lights look great! LED's really make the older lenses pop. Install video was great. Follow it for a quick and easy install. Took me less that 2 hours. Resistors included were not needed for me.

Ken Mc
1987-1993 Ford Mustang LX Sequential LED Tail Light Conversion Kit - Plug & Play
1987-1993 Ford Mustang LX Sequential LED Tail Light Conversion Kit - Plug & Play

Awesome product

N.
Flush Mount LED Tail Lights 2010-2023 Lexus GX460 Toyota Prado Sequential Lensless
Flush Mount LED Tail Lights 2010-2023 Lexus GX460 Toyota Prado Sequential Lensless

Exactly what I wanted!
I wish there were clear instructions included. Once I figured the wiring it was quick, hardest part was access to the fog lights on my car.

Tina
ORACLE Lighting 2010-2013 Chevrolet Camaro LED Pre-Assembled Halo Fog Lights-Non RS
ORACLE Lighting 2010-2013 Chevrolet Camaro LED Pre-Assembled Halo Fog Lights-Non RS
My first ORACLE purchase, install was super easy

My first ORACLE purchase, install was super easy and fast. Looks factory, super bright. I would recommend this product to anyone!!!!

Rtathay
2020-2025 Jeep Gladiator JT Rear Bumper LED Reverse Lights | 1,500 Lumens
2020-2025 Jeep Gladiator JT Rear Bumper LED Reverse Lights | 1,500 Lumens
Once again ORACLE has hit a home run!!!! Install

Once again ORACLE has hit a home run!!!! Install was super easy and fast. Lights up the ground when getting in and out of the jeep. Top quality

Rtathay
Jeep Wrangler JL & Gladiator JT Sidetrack LED Fender Lights - Entry & Turn Signal | ORACLE
Jeep Wrangler JL & Gladiator JT Sidetrack LED Fender Lights - Entry & Turn Signal | ORACLE
Oracle rocks!!!! Lights look factory and install

Oracle rocks!!!! Lights look factory and install was super easy and fast. I would definitely recommend these Lights to anyone

Rtathay
2024+ Jeep Wrangler JL/ Gladiator JT Pre-Runner Style LED Grill Light Kit
2024+ Jeep Wrangler JL/ Gladiator JT Pre-Runner Style LED Grill Light Kit
Look great, brighter than stock!

Look great, brighter than stock and eliminate that bulky taillight complex. Only hitch I had was the screw connectors on the new lights didn’t fit the stock screws, so I had to rig the old screw connectors to fit onto the new taillights to be able to mount them. Added unnecessary time to what should have been a very quick replacement, even with my Oracle reverse lights added in the bumper. Gives the truck a much cleaner look.

Tom D
V2 | Flush Mount LED Tail Lights for Jeep Gladiator JT | Low-Profile | Plug-and-Play
V2 | Flush Mount LED Tail Lights for Jeep Gladiator JT | Low-Profile | Plug-and-Play
For 2025 rebel

Hi,
I have a 2025 Ram Rebel equipped with the front camera (360 camera system).
Since this product lists compatibility up to 2024 Rebel, I want to confirm:
1. Will this fit the 2025 Rebel bumper without modification?
2. Does the light bar interfere with the front camera view or sensors?

Thanks!

Yao.L
2019-2025 RAM Rebel/TRX/RHO Front Bumper Flush LED Light Bar | 100W 12,000 Lumens
2019-2025 RAM Rebel/TRX/RHO Front Bumper Flush LED Light Bar | 100W 12,000 Lumens
Bronco Flush LED Taillights

I love the look! Yes the interior blinkers do blink faster. The driver side needed 4 washers and a rubber o’ring to protect the body so the it fit more flush. I was going to add spacers like they have for TV mounts but I couldn’t find any.

Thanks Oracle for a nice aftermarket product.

Ruth
V2 | 2021-2025 Ford Bronco Flush Mount LED Tail Lights - Low Profile | 1,400 Lumens
V2 | 2021-2025 Ford Bronco Flush Mount LED Tail Lights - Low Profile | 1,400 Lumens

Very nice upgrade, from stock, and very fast shipping. Install was very easy.

Jeffrey
Flush Mount LED Tail Lights 2010-2023 Lexus GX460 Toyota Prado Sequential Lensless
Flush Mount LED Tail Lights 2010-2023 Lexus GX460 Toyota Prado Sequential Lensless

Lights look great and installation was easy.

Timothy
V2 | Flush Mount LED Tail Lights for Jeep Gladiator JT | Low-Profile | Plug-and-Play
V2 | Flush Mount LED Tail Lights for Jeep Gladiator JT | Low-Profile | Plug-and-Play

Lights are very bright and easy to install.

Timothy
Oculus™ Bi-LED Projector Headlights for Jeep Wrangler JL/ Gladiator JT
Oculus™ Bi-LED Projector Headlights for Jeep Wrangler JL/ Gladiator JT
Off-Road, Farm, and City Friendly

Had to replace a factory light that broke from a small hiccup. These were basically the same price for two, so I did it and very happy.

Now, there is more plastic, but that is what I wanted as I have no navigate, city, off-road, and farm traffic. Seems to be brighter, and my regular garage saw they were super easy to install.

Mike from GXOR
Flush Mount LED Tail Lights 2010-2023 Lexus GX460 Toyota Prado Sequential Lensless
Flush Mount LED Tail Lights 2010-2023 Lexus GX460 Toyota Prado Sequential Lensless

Awesome product as alway, plug and play very easy install, they definitely look better than my original pair of oracle flush mounts that i tinted to be black!

MULLET
V2 | Flush Mount LED Tail Lights for Jeep Gladiator JT | Low-Profile | Plug-and-Play
V2 | Flush Mount LED Tail Lights for Jeep Gladiator JT | Low-Profile | Plug-and-Play
Modern technology, OEM look

Very easy install. Video instructions make it very simple. Paper instructions highlight nicely every step. The fit is perfect along with all connection points. The plug and play design makes this a seamless install. No wires to cut, clean and easy. The lights are top quality. Super bright. Blinkers are sequential which is cool. Reverse light is twice as big. Way brighter. Highly recommend these to modernize the car and keep that OEM look which is what I wanted.

Stephen Bosse
1987-1993 Ford Mustang LX Sequential LED Tail Light Conversion Kit - Plug & Play
1987-1993 Ford Mustang LX Sequential LED Tail Light Conversion Kit - Plug & Play

Compare products

{"one"=>"Select 2 or 3 items to compare", "other"=>"{{ count }} of 3 items selected"}

Select first item to compare

Select second item to compare

Select third item to compare

Compare
SEARCH BY VEHICLE
Shop Now