Upgrade your Wrangler JL with sleek flush-mount LED tail lights engineered for 2018–2025 models. Designed to sit tight and low-profile against the body, these tail lights deliver a clean OEM+ appearance while improving visibility, reducing trail damage risk, and adding signature perimeter lighting that sets your Jeep apart.

Unlike bulky factory tail lights that protrude from the body, these flush-mount tail lights sit nearly flush with the rear end of your Wrangler JL. This low-profile design looks cleaner and more modern while helping protect your lights when navigating tight trails, backing up to obstacles, or rock crawling.

The wraparound design keeps your tail lights visible from wider angles—an important safety benefit when vehicles approach from the side on trails or in parking lots.

• Flush, low-profile design wraps tightly around the rear and protrudes significantly less than factory tail lights to help avoid trail damage
• 12 high-powered LED reverse lights for enhanced reverse illumination day or night
• Signature perimeter lighting creates a modern OEM+ look with wraparound visibility
• Plug-and-play installation with factory connectors—no splicing or modifications required
• Factory sensor compatible supports BSM and cross-traffic alert (factory sensor transfers over)
• Works with base & LED packages for halogen and LED-equipped Wranglers
• Weather-sealed construction built for mud, water, dust, and extreme temperatures
• Two lens options: Standard Red Lens or Tinted Lens for a more aggressive appearance

These tail lights are designed to work with your Wrangler’s factory safety features. The OEM blind spot monitoring (BSM) sensor transfers directly into the ORACLE housing to support the factory cross-traffic system.

Factory System Reference (FCA)

North American JL Models: Designed specifically for North American market Wranglers with full plug-and-play compatibility.

2023–2025 JL Compatibility: Key components like the BSM sensor and factory tail light mounting cone remain compatible. Disassembly steps may differ slightly versus the install video, but components still fit as designed.

Designed to fit flush with the rear end of the Jeep Wrangler, the JL Flush Tail Lights from ORACLE Lighting deliver improved styling and modern LED features. This innovative low-profile design protrudes significantly less than factory tail lights to help avoid damage while trail riding.

These JL tail lights feature an attractive wraparound look with functional LED performance—including high-powered reverse lighting and a unique signature perimeter light. The plug-and-play design also supports factory features like cross-traffic and allows the factory BSM sensor to transfer over.

Available in both Standard Red Lens and an optional Tinted version for a more aggressive appearance.

• (2) ORACLE Lighting Flush Mount LED Tail Lights
• (2) Adhesive Fender Reflectors
• (2) High Powered LED Resistors (for halogen-equipped models if needed)
• Necessary mounting hardware
• Installation guide

Installation Note: Simple bolt-in installation using factory mounting points. Most Wrangler owners complete installation in 45–60 minutes with basic hand tools. High-powered LED resistors are included for halogen-equipped models that may experience reverse light issues.

Warranty Info

Product Videos

The Wrangler JL Deserves Better Than Factory

The Jeep Wrangler JL is built to go places most vehicles can't. The factory tail lights? Not quite built for that same ambition. They protrude inches past the body, making them vulnerable on tight trails — and they look like what they are: a cost-controlled OEM solution.

The ORACLE Lighting Flush Mount LED Tail Lights wrap tightly around the rear of the Wrangler JL, protruding significantly less than factory tail lights — a low-profile design that reduces the risk of trail damage while delivering a clean, modern OEM+ appearance.

Available in Standard Red (Part #5884-504) and Blacked-Out Tinted (Part #5884-504-T) for 2018–2025 Jeep Wrangler JL and JLU models.

Design That Protects as Much as It Impresses

Low-Profile Flush Fit — Built for the Trail

Damaging factory tail lights on trails is not an uncommon issue for Wrangler owners who often off-road their Jeeps. The factory design protrudes several inches past the body, creating unnecessary exposure to trees, boulders, and other obstacles on tight trails. The ORACLE flush mount design sits tight to the body panel, dramatically reducing exposure and vulnerability. Whether you're squeezing between trees on a wooded trail or rock crawling with inches to spare, these lights stay out of harm's way.

Wraparound Visibility From Any Angle

Because of the nearly flush wrap-around design, the lighting is visible from any rear angle — an important safety benefit when vehicles approach from the side on trails or in parking lots. The factory lights, by contrast, have limited side-angle visibility due to their narrow, forward-facing profile.

Signature Perimeter Lighting

These Jeep Wrangler JL tail lights feature a unique signature perimeter lighting design that traces the outer edge of the housing — giving your Wrangler a distinctive, premium appearance that stands apart from both stock lights and generic aftermarket alternatives. It's a design detail that elevates the entire rear end of the vehicle.

12 High-Powered LEDs Light Up the Night Behind You

The reverse light features 12 high-powered LEDs for optimal rear illumination. That's a substantial leap over the factory reverse light — giving you a wider, brighter view when backing up in dark campsites, tight trail turnarounds, or unlit parking areas. The LED output is immediate and consistent, with no warm-up delay and no degradation over time.

Plug-and-Play. Sensor Compatible. Truly Hassle-Free.

Direct OEM Replacement — No Cutting, No Splicing

These LED tail lights come pre-assembled and use a simple connection with no splicing needed, making this one of the cleanest, most stress-free upgrades you can do on a Wrangler JL. Most owners complete the full install in under an hour.

Full Factory Sensor Compatibility

The BSM (Blind Spot Monitoring) sensor and the factory tail light mounting cone remain unchanged and are compatible with ORACLE's tail lights. The cross-traffic sensor transfers directly from your factory assembly — no modification, no loss of functionality, no guessing. This is a critical differentiator from lower-quality alternatives that require sensor deletion or custom wiring.

Compatible With Both Base and LED Factory Packages

These flush-mount tail lights are compatible with both the base and LED packages, meaning factory trim level has no bearing on fitment or functionality. Whether your JL came off the lot with halogen or LED tail lights, ORACLE's JL flush lights will work with your existing wiring.

 2023–2025 JL Compatibility Note

For 2023–2025 JL vehicles, key components like the BSM sensor and factory tail light mounting cone remain unchanged and are compatible with ORACLE's tail lights. Disassembly steps may differ slightly from the installation video, but all components still fit as designed.

IP67 Waterproof — Sealed for Whatever the Trail Throws at You

The ORACLE JL Flush Tail Lights are IP67 waterproof rated, meaning they are fully sealed against dust ingress and rated for water immersion. River crossings, monsoon rain, deep mud, pressure washing after a hard trail day — these lights are engineered to take it. Durable polycarbonate lens construction resists UV yellowing and cracking, keeping the lenses optically clear and the housing looking sharp for years.

Standard or Tinted — Choose Your Wrangler's Look

Standard Red (Part #5884-504): Classic, clean, and immediately recognizable as a premium upgrade over stock. The red lens with clear reverse section delivers maximum brightness and visibility while complementing the factory body lines with a sharper, more modern profile.

Tinted / Blacked-Out (Part #5884-504-T): The smoked lens version is the go-to for Wrangler builds with dark trim packages, Jeep Farout editions, or any black-out aesthetic. Available in standard and tinted lenses, both versions deliver identical LED output — the difference is purely about how your build looks when the lights are off.

A Note for Halogen-Equipped Wranglers

Some halogen-equipped Wranglers may require the use of a programmer to prevent park lights from shutting down. LED resistors are included in the box to address reverse light strobing or shutoff in halogen applications — a simple fix outlined in the included installation guide. A Tazer or similar programmer can resolve any park light issues if they occur.

What's in the Box

Each purchase includes: two flush mount LED tail lights, two adhesive fender reflectors, two high-powered LED resistors, and the necessary hardware and installation guide. No additional parts are needed for sensor-equipped North American JL models — the factory BSM sensor and mounting cone transfer directly.

Fitment: 2018–2025 Jeep Wrangler JL and JLU (all trims) — North American models. For EU/Export Wranglers: ORACLE recommends the Dual Function Amber/White Reverse LED Modules (Part #5915-JL-023) for road-compliant turn signal operation.

FAQs: Jeep Wrangler JL Flush Mount Tail Lights

Q: What years and models do the ORACLE JL Flush Tail Lights fit?

These lights are designed specifically for the 2018–2025 Jeep Wrangler JL and JLU in all North American trim levels — Sport, Sahara, Rubicon, and beyond, including both 2-door and 4-door configurations. They are not designed for European or export-spec Wranglers without an additional module upgrade.

Q: Will these work with my Wrangler's Blind Spot Monitoring (BSM) and Cross-Traffic Alert system?

Yes. The BSM sensor and the factory tail light mounting cone remain unchanged and are compatible with ORACLE's tail lights — the cross-traffic sensor swaps directly over from the factory assembly with no modification required. Note that on 2023–2025 JL models, the disassembly process differs slightly from the installation video, but all components still fit correctly.

Q: My Wrangler has halogen tail lights from the factory. Will these LED lights still work?

They will work, but halogen-equipped Wranglers may experience reverse light strobing or shutoff due to the load difference between halogen and LED systems. The included LED resistors resolve this issue when connected per the installation guide. If park lights shut down, a programmer such as a Tazer can be used to resolve it — a quick, one-time fix.

Q: Are the ORACLE JL Flush Tail Lights waterproof?

Yes — the lights are IP67 waterproof rated, meaning they are completely dust-sealed and rated for full water immersion. They are built to handle river crossings, heavy rain, trail mud, and pressure washing without compromise.

Q: What's the difference between the standard and tinted versions?

Both versions are electrically and functionally identical — the same 12-LED reverse output, the same signature perimeter lighting, and the same plug-and-play installation. The difference is purely aesthetic: the standard version features a traditional red and clear lens, while the tinted version uses a smoked lens for a blacked-out appearance that suits darker Wrangler builds and trim packages.

Q: How long does installation take, and do I need a professional?

Installation should take about 1 hour for most owners with basic mechanical confidence. No cutting, splicing, or custom wiring is required — it's a true plug-and-play replacement. The factory BSM sensor and mounting hardware transfer directly from the stock assembly, and an installation guide (plus a video link) is included with every purchase.

Q: Do these tail lights come with a warranty?

Yes. ORACLE Lighting backs the JL Flush Tail Lights with a 2-year manufacturer's warranty, covering defects in materials and workmanship. This reflects ORACLE's confidence in the durability and build quality of the product — and gives you peace of mind for years of off-road use.