Introducing the ORACLE StreetSync™ Pro: The World's First Integrated LED Whip System With Dual Horn
If you've ever built out a UTV for street or dirt trails, you know the parts list. LED whips. Turn signal kit. Brake lights. Hazard lights. Horn. Reverse lights. Wiring harnesses. Relays. Switch panel. By the time you're done, you've sourced half a dozen separate components, routed wires in every direction, and spent as much time in the wiring diagram as you have on the trail.
The ORACLE StreetSync™ Pro was built to change all of that.
What Is the StreetSync™ Pro?
The StreetSync™ Pro is a fully integrated LED whip system that replaces every individual component you'd normally need for street-ready UTV signaling in a single plug-and-play unit.
Inside each whip is everything you need for visibility, communication, and compliance:
- Sequential turn signals (left, right, and hazard)
- Integrated brake lights
- Reverse lighting
- Dual 110 dB horn system
- 300+ RGB lighting patterns with Dynamic ColorSHIFT
- Three independent control methods
No relays. No additional modules. No complex wiring. Plug in and ride.
The Feature That Changes Everything: Integrated Dual Horn
Most LED whips do one thing: light up. If you wanted a horn on your UTV, that was a separate purchase, a separate mount, separate wiring, and separate switch.
The StreetSync™ Pro integrates a dual 110 dB horn system directly into the whip assembly itself. There is no external mounting required. There is no separate horn module. The horn is built in (activated by a momentary press of the multifunction switch), and it delivers the kind of audible output you actually need when riding in traffic, on shared paths, or anywhere other vehicles or pedestrians are present.
This is an ORACLE-exclusive design. It isn't available from any other whip manufacturer.
One Product. Everything Required for Street Use.
Here's what the StreetSync™ Pro replaces:
| What you'd normally buy separately | StreetSync™ Pro |
|---|---|
| LED Whips | ✓ Built-in |
| Turn Signal Kit | ✓ Built-in |
| Brake Light Module | ✓ Built-in |
| Hazard Light System | ✓ Built-in |
| Reverse Light Module | ✓ Built-in |
| Horn (Dual 110 dB) | ✓ Built-in (ORACLE exclusive) |
| Wiring Harnesses | ✓ Plug-and-play included |
| Relays | ✓ Not required |
| Multifunction Switch | ✓ Built-in |
| Bluetooth Controller | ✓ App control included |
Three Ways to Control It
44-Button RF Remote: The included RF remote gives you instant access to all 300+ lighting modes, SOS emergency mode, music sync, and horn activation. Everything reachable without unlocking your phone.
Magic Lantern Bluetooth App: Full color wheel control, brightness from 1% to 100%, scene modes, schedule functions, and DIY lighting configuration all from your smartphone. Compatible with iOS and Android via the Magic Lantern app.
Wired Multifunction Switch: The integrated soft-touch switch mounts to your dash or switch panel using a standard Carling-style opening. Four functions built in: left turn signal, right turn signal, hazard lights, and horn. No additional wiring or relays required.
300+ Lighting Modes (Including Music Sync)
The RGB lighting side of the StreetSync™ Pro runs Dynamic ColorSHIFT technology with over 300 patterns: chasing, strobing, flashing, breathing, and music-reactive modes that sync to whatever you're playing through the Mic function in the app.
The memory function stores your last used setting, so the system comes back exactly where you left it every time you power on.
Built for the Conditions You Actually Ride In
IP67 waterproof rated, submersible, and sealed against dust and mud, rated for real off-road use in any conditions.
Heavy-duty spring dampener base absorbs vibration and flex through rough terrain to keep the whip stable at speed without stressing the mount.
Quick-release mounting system mounts in your ½" bolt location; remove for transport or storage without tools.
Gloss black powder-coated aluminum housing is built to handle UV, trail, and weather exposure over the life of the vehicle.
IP67 qualification verified through full electrical performance, ingress protection, thermal cycling (-45°C to 65°C), salt spray, cord retention, and packaged drop testing. 8 of 8 tests passed.
What's in the Box
- (1) ORACLE StreetSync™ Pro Integrated LED Whip System
- (1) Plug-and-play wiring harness
- (1) Integrated control box
- (1) 44-button RF remote control
- (1) Quick-connect mounting base
- (1) Spring dampener mounting base
- (1) Instruction manual
Specs
| Spec | Detail |
|---|---|
| Part Number | 4251-023 |
| MSRP | $389.95 |
| Input Voltage | 12–15V DC |
| Max Power | 168W |
| Horn Output | Dual 110 dB each |
| LED Type | RGB 5050 |
| Lighting Patterns | 300+ modes |
| IP Rating | IP67 |
| Length | 28 inches (71 cm) |
| Diameter | 3.5 inches (92 mm) |
| Housing | Aluminum, gloss black powder coat |
| Base | Aluminum with quick release + spring dampener |
| Control | 44-button RF remote, Bluetooth app, wired switch |
| Warranty | 1-Year |
Compatible Vehicles
Universal fitment for any UTV or SXS with a standard whip mount or flag pole base, including:
- Polaris RZR (all generations)
- Can-Am Maverick and Defender
- Yamaha YXZ and Wolverine
- Honda Talon and Pioneer
- Kawasaki Teryx
- Any UTV / SXS with standard ½" whip mount
Watch It in Action
Install Resources
The StreetSync™ Pro is designed for fast, clean installation in typically under an hour with no relays or additional modules required. The plug-and-play harness connects directly to your vehicle's factory wiring.
Download the Installation Manual (PDF) →
⚠️ Street Use Disclaimer: Check with your local and state laws before operating your side-by-side vehicle on public roads. Requirements for street use vary by jurisdiction; it is the user's responsibility to ensure compliance with all applicable regulations.
Ready to Ride?
The ORACLE StreetSync™ Pro is available now. One system. Everything you need for street-ready UTV signaling, lighting, and communication straight out of the box.
Questions about compatibility or installation? Contact our team.