Jeep Wrangler JL/Gladiator JT ORACLE Ambient LED Lighting Footwell Kit

How long should it take to install four strips in the foot well for a 2025 Gladiator?

Tried installing two pairs in a 2020 JT, though the courtesy lights. One pair worked fine, but after the second pair, the courtesy lights stopped working (they would blink at a regular interval, Im assuming that indicates a fault, I would suspect I overloaded it).

I suppose as long as you are careful about what circuit you wire them to they should be fine, but it doesnt seem like the courtesy lights on a 2020 JT can handle four strips.

I tried switching them to an aux switch but misread the color coding of the harness and ended up frying them but that was my own fault, and not an issue with these lights as far as I can tell.

I just recently installed a set of Oracle ambient footwell lights in my 2018 Jeep JLU. Placement of the LED light strips is simple for the front footwell as well as for the rear passenger compartment. Front strips were placed along the rail that runs along the dashboard trim and the rear were mounted on the metal rail of the front driver's and passenger's seats. The hardest part was the wiring as the wires used for the ambient lighting is very thin and prone to breaking if using a T-tap. I would suggest exposing just enough of the insulation to attach a pigtail where all of your Oracle wires will connect to. $50 and a couple of hours to do the job right.