V2 | Flush Mount LED Tail Lights for Jeep Gladiator JT | Low-Profile | Plug-and-Play

These tail lights combined with the race track tailgate panel are easy to install increase the safety and visibility of my Gladiator and are a hit everywhere I go.

I recently had a warranty issue and contacted Oracle customer service. They were fantastic. They responded immediately and send me replacement lights. Other companies should follow the lead of Oracle!

I received a set of these in smoke tint for Christmas and love them. I am a 63 Y/O disabled man and I installed these in approximately 30-40 minutes and that includes swapping sensors over.I highly recommend them, but time will tell. (Fingers crossed)!

The new taillights made my gladiator look so much better! The reverse lights are BRIGHT! Even added a decal to them!

I've been running these taillights for around 4 months now. Not a single issue with them. Bought the tinted ones cause I like the dark look better. That said, they won't pass PA inspection at the dealer. Not a big deal swap back to stock for a day at most. They look fantastic on the white truck, very happy that I spent the money on them, for me they worked as plug and play drama free.

Easy installation, great product, I also have ordered the back up kit with the plug and play wiring harness.

Look great, brighter than stock and eliminate that bulky taillight complex. Only hitch I had was the screw connectors on the new lights didn’t fit the stock screws, so I had to rig the old screw connectors to fit onto the new taillights to be able to mount them. Added unnecessary time to what should have been a very quick replacement, even with my Oracle reverse lights added in the bumper. Gives the truck a much cleaner look.

I ordered a set of these through a vendor website for my 2021 Gladiator, and they look great! I did end up needing to use the extra reverse light transmitter, no big deal. The only downside was one of them wouldn't stay on at all times, so I contacted Oracle support. Mark was incredibly quick to address my concern, and send out a replacement immediately. The new one functions perfectly! These are definitely a massive upgrade to the factory lights (especially since mine were halogen, and had an almost pointless reverse light). This reverse light is stunningly bright and clear, and the red is plenty bright as well. Highly recommend these to anyone looking to upgrade!

One of my lights failed. I contacted customer service, sent the requested , receipt, video of the issue and pictures. They asked for an address to ship the replacement lights to and a pic of the cords cut once I replaced with the new lights. Thank you Oracle for standing by your product!

These lights look really good. High brightness without leaping off the body like the factory stock tail lights. Fits snuggly without modification. But let me tell you about what happens when the inevitable happens. Customer service was quick to respond, replaced the damaged part with no question. The only delay was on me having the time to get them the info they needed. Oracle Lighting stands by their products!

These look great, are much less bulky, and much brighter than the non-led factory taillights. The first passenger rear taillight had a bad connector, but I contacted customer service and they shipped me a replacement the same day. Great customer service. The replacement works perfectly. Even more impressive, is they wanted to know the batch number ,so they could ensure no one else had the same issue.

I really liked, look so nice and fit so good!

Ive had these for about 1.5 years. They have been great and look way better than stocks.

Great look compared to stock. Also to get a better flush firment cut the rubber grommet that the metal pins go into for them to go in further.

I love the style and the reverse lights especially are very bright...a welcome change. The only issue I had was the Jeep LED harness can be very picky sometimes and getting the system to acknowledge the left real light took some time...eventually, the system got it and there have not been problems since.

Overall...buy them and you'll like them.

The design is great, but after waiting for months to get these lights due to back order. My lights work great most of the time then I started noticing the reverse lights will come on and off while in reverse. Someone's the tall lights will not even come on unless I cycle the main sith on and off a couple times. I can not leave light sith on auto due to the tail lights not wanting to come on most of the time when in the auto position.

I absolutely love these lights!!! I started with just headlights to replace my stock halogens. They were so much brighter and whiter that I immediately replaced my fog lights as well. The latest add-on is the flush mount tail lights. Not only do they look better than the boxy stock lights, but they are significantly brighter as well!

I have been trying to reach someone about my passenger side tail light that is not working and need to see if I can get a replacement. I love my taillights but with no one returning my inquiries from Oracle after multiple attempts I am more than likely going to get my new tail lights from a different manufacturer. Love the lights and proud to tell everyone about them, but, I am not about to spend another almost $400 to replace one light and have an extra just floating around the house.

Installed the Oracle slim line tail lights on my Jeep Gladiator JT. Nice and bright. Look awesome. No more mouse ears on the rear. Albeit, I have noticed my reverse lights do not come on after a drive. Sometimes they work and sometimes they go on and off. After parking for a while they work. But then they will go out when backing up. Not sure if this is going to be an issue or not. Hopefully not.

Installed these lights around 4 months ago and worked great , took Jeep cross country and still worked great .
Now my right side is dead it has power but light not working .
And of course Extreme Terrain who I ordered them from doesnt carry them . So now what to do ?

Install went very well, looks great! but I can't get the reverse light to work? I'm sure there's an easy explanation for it.

THESE LIGHTS HAVE AN AMAZING LOOK! IT COMPLETES THE JEEP GLADIATOR. JEEP SHOULD BE ASHAMED OF THE UGLY CINDER BLOCK LIGHTS THEY LET IT LEAVE THE FACTORY WITH. I WOULD GIVE THESE LIGHTS 5 STARS FOR LOOKS BUT DUE TO HAVING ISSUES WITH THE REVERSE LIGHTS I GAVE IT 4, LET ME EXPLAIN, I ORDERED THESE LIGHTS AND THE BUMPER REVERSE LIGHTS FOR A HALOGEN REPLACEMENT. NONE OF THE REVERSE LIGHTS WORKED WITH THE HARNESS I BOUGHT FROM ORACLE, BUT THEY DID COME UP WITH A FIX FOR BOTH. LET ME FIRST SAY THEIR CUSTOMER SERVICE GALS ARE AMAZINGLY HELPFUL. SO HERE IS WHAT THEY HAD ME DO TO FIX THE REVERSE LIGHTS IN THE TAIL LIGHTS AND BUMPER: 1) I HAD TO WIRE THE BUMPER REVERSE LIGHTS INTO MY TRAILER WIRING HARNESS. EASY TO DO RED WIRE FROM LIGHTS WENT TO THE WHITE WIRE WITH THE ORANGE STRIPE ON THE TRAILER HARNESS, THE BLACK WIRE FROM THE LIGHTS WENT TO THE BLACK WIRE WITH GRAY STRIPE ON THE TRAILER HARNESS. I HAD TO SPLICE WIRE TO THE PASSENGER SIDE LIGHT TO ALLOW IT TO REACH THOUGH. THEN ORACLE CUSTOMER SERVICE SENT ME, FREE OF CHARGE, TWO 10W RESISTORS TO SPLICE INTO THE REVERSE LIGHT WIRING ON THE ORACLE TAIL LIGHTS. NOW EVERYTHING WORKS GREAT. THEY REFUNDED ME FOR THE ORACLE PLUG AND PLAY HARNESS (THAT DID NOT WORK TO CORRECT THE PROBLEM) SO THAT WAS NICE OF THEM AS WELL. IF YOU HAVE A GLADIATOR WITH LED LIGHTS ALREADY I DON'T THINK YOU WILL HAVE THIS ISSUE, BUT NOW THE TAIL LIGHTS AND BUMPER LIGHTS ARE ON TWO DIFFERENT CIRCUITS AND WORK GREAT! THESE LIGHTS ARE A MUST!!

When first starting the jeep is says my turn signals are out. Flasher on dash blinks fast. My jeep came with LED lights so I installed without resisters. I see others are having the same issue. Is there an explanation for this.

Ordered in October and received in January. Finally had a warm day today to do the install. Easy installation. They send a link in the instructions in the box to a video, which is easier to follow along with and answers any question you have about rear sensors (if you have them) and stock LED vs stock halogen replacement.

Was quick and painless and turned out great. Much better look than the stock taillights in my opinion. 5 stars. If I have any issues down the road Ill update my rating.

I love the look and the easy install of these lights. I have 2021 Mojave and I love how streamlined the back end looks.
The only issue I have is the “turn signal is out” indicators comes on whether or not the LED resistor is plugged in or not. Any suggestions?

I had LED lights starting out with and replaced with the new taillights. I've plugged up the LED resistors and also unplugged. My blinkers blink fast on the dash and also tails me rear lights out on the dash when I start it