ORACLE Lighting Universal LED Wig-Wag Strobe Flasher Module

FREE SHIPPING OVER $100 2 YEAR WARRANTY FAST CUSTOMER SERVICE

ORACLE Lighting Universal LED Wig-Wag Strobe Flasher Module

Add high-visibility flashing functionality to compatible 12-volt LED lights with the ORACLE Universal LED Wig-Wag Strobe Flasher Module. This compact, solid-state controller operates two independent lighting circuits and transforms standard LED lights into a coordinated warning-light system with selectable flash patterns.

$39.99

SKU: 2921-504

Increments of 1 Minimum of 1 Maximum of

Product Overview

Compatibility & Integration: This module is designed to control compatible 12-volt LED lighting and should not be connected directly to lighting loads exceeding 3 amps per channel. Compatibility with factory vehicle lighting, CAN bus monitored circuits, pulse-width-modulated circuits, or multiplexed lighting systems is not guaranteed without additional interface components. For vehicles equipped with bulb-out monitoring or computer-controlled lighting, the module should be integrated on the accessory-light side of the circuit or installed using appropriate isolation relays. Do not connect the module directly to sensitive factory control-module outputs unless the circuit has been verified by a qualified installer.

Choose from alternating wig-wag sequences, simultaneous flashes, double flashes, quad flashes, rapid strobes, and variable-speed patterns. With flash rates reaching up to 1,200 flashes per minute, the module creates an unmistakable visual signal that can help make a parked, stopped, or slow-moving vehicle more noticeable.

The dual-output design supports up to 3 amps per channel, making the module ideal for controlling a pair of compatible LED reverse lights, chase lights, auxiliary lights, pods, or other 12-volt LED lighting products. Each output can be used to create left-to-right alternating effects or simultaneous flashing patterns, depending on the selected mode.

A dedicated pattern-selection wire makes it easy to cycle through the available patterns using a momentary switch. Once the desired pattern is selected, the module stores the setting for convenient operation. Its compact, epoxy-sealed solid-state construction helps protect the internal electronics from moisture, dust, vibration, and the demanding conditions commonly encountered in automotive installations.

Whether installed on an off-road build, work vehicle, recovery vehicle, show vehicle, or trail rig, the ORACLE Universal LED Wig-Wag Strobe Flasher Module provides a clean and versatile way to add professional-style flashing effects to compatible ORACLE LED lighting.

Adds wig-wag and strobe functionality to compatible 12-volt LED lights
Multiple user-selectable flash patterns
Alternating and simultaneous flashing modes
Double, quad, rapid-strobe, random, and variable-speed sequences
Flash rates up to 1,200 flashes per minute
Two independently controlled LED output channels
Supports up to 3 amps per output channel
6-amp combined maximum output capacity
Dedicated pattern-selection wire
Compatible with an optional momentary pattern-selection switch
Solid-state electronic design with no mechanical flasher contacts
Epoxy-sealed construction helps resist moisture, dust, and vibration
Compact flange-mount housing for discreet installation
Universal design for a wide variety of automotive LED lighting applications
Ideal for reverse lights, chase lights, auxiliary lights, LED pods, and warning lights

Product Type: Universal LED wig-wag and strobe controller

Operating Voltage: 12V DC
Number of Outputs: 2
Maximum Output Per Channel: 3A
Max Combined Output: 6A
Max Combined Watts: 72
Maximum Flash Rate: Up to 1,200 flashes per minute
Lighting Compatibility: 12V LED lighting
Pattern Selection: Momentary + trigger wire
Electronic Design: Solid state
Environmental Protection: Epoxy-sealed electronics
Mounting Style: Integrated flange mount
Installation Type: Universal hardwired
Intended Applications: Automotive, off-road, work, utility, recovery, and show vehicles

This universal controller is designed for compatible 12V LED lighting.

LED reverse lights
Amber or white chase lights
Auxiliary LED pods
Flush-mount LED lights
Grille-mounted warning lights
Work and scene lights
Rock lights within the module's electrical capacity
Rear-facing dust, trail, or recovery lights
Custom automotive LED lighting

Before installation, calculate the current draw of each connected light. The total load connected to either output must not exceed 3 amps.

Installation Guide & Wiring

The module uses a straightforward universal wiring configuration consisting of:

12-volt positive power input
Chassis ground
Left or Channel 1 LED output
Right or Channel 2 LED output
Pattern-selection trigger wire

A momentary switch may be connected to the pattern-selection wire to cycle through the available flash patterns. The module should be protected with an appropriately rated inline fuse and mounted securely away from excessive heat or moving components.

Professional installation is recommended. Additional relays may be required when controlling lights that exceed the module's rated output or when integrating the flasher with a vehicle's factory lighting functions.

ORACLE Lighting Jeep Gladiator JT Flush Tail Light Auxiliary Light Pods

Flush Mount LED Tail Lights for Jeep Gladiator JT with standard lens.

TRIGGER 4 PLUS Wireless Accessory Control System

TRIGGER 6 SHOOTER Wireless Accessory Control System

Legal Notice: Flashing, strobing, or alternating vehicle lights may be regulated or prohibited on public roads. Certain colors and flash patterns may be restricted to authorized emergency, construction, utility, or service vehicles. The installer and vehicle operator are responsible for confirming compliance with all applicable local and state laws. Use off-road, on private property, or for show purposes where required.⠋

Warranty Policy

Returns & Exchanges

Shipping Policy

Why Oracle?

All of our products are engineered and designed right here in Metairie, Louisiana. With over 15 years of experience building lighting for the automotive aftermarket, we control every step of the process - from R&D to final assembly - so you're getting a part built to a standard, not just a spec sheet.

Whether it's an install question, a fitment question, or you just want a second opinion before you order - pick up the phone and talk to someone who actually knows the product. No call centers, no scripts. Just people who know Jeeps, Broncos, Tacomas, and trucks as well as you do.

We don't make one-size-fits-all lighting. Every product is engineered around the specific fitment, electronics, and driving demands of the platform it's built for - so what you install is what was designed for your vehicle from day one.

Before anything ships, it's been run through real-world abuse - mud, vibration, weather, and mileage - not just a bench test. If it can't survive the trail or the daily commute, it doesn't make it to your truck.

We stand behind what we build. Every Oracle product ships with a manufacturer warranty and a team that actually honors it - because a good part with no support isn't a good deal.

Orders ship quickly from our Metairie facility, with tracking sent the moment your parts are on their way - so you know exactly when to expect them, every time.

Product label: Sold out

Product label: Sold out

Product label: Sold out

Product label: Sold out

SHOP ALL→

My Cart (0)

ORACLE Lighting Universal LED Wig-Wag Strobe Flasher Module

Product Overview

Why Oracle?

YOU MAY ALSO LIKE